Hose Handling, Drying & Storage

  • Firehouse Express Dryer – 6 Gear

    Firehouse Express Dryer – 6 Gear

    • NFPA 1851 Compliant
    • Industry Leading 10-Year Warranty
    • 900 CFM
    • Dry Gear in an average of 3 Hours
    • Dry Turnout Gear, Hose, Dive Suits & More
    • Commercial Grade Construction
    • Includes: (6) hangers and (4) shelves
    • (6) 1,000 W Heating Elements - 6,000 W Total
  • Large Diameter Hose Winder

    Large Diameter Hose Winder

    • 48” Long x 36” Wide x 49” High
    • Includes (2) Swivel & (2) Rigid w/ Brake Casters
  • Large Diameter Hose Winder Trailer Hitch Mount

    Large Diameter Hose Winder Trailer Hitch Mount

    • Complete with 2 clevis pins that hold the hitch bar to the Large Diameter Hose Winder
    • Complete with 4 screws for mounting to the Large Diameter Hose Winder
    • Heavy-Duty powder coated
    • Made in the USA
    • Hitch securing pin must be provided by customer
    • SAFETY INFO: Both pins must be secured from the trailer hitch bar to the receiver during transportation
  • Two Gear Dryer

    Two Gear Dryer

    • Factory preset temperatures ensure proper drying temperature for each unique clothing or turnout item
    • Made of heavy-duty steel construction with white powder coated finish
    • Comes complete with: (2) PPE hangers, hanging pole, (2) built-in door racks and (2) flat shelves
    • Convenient 120V 15 Amp breaker power
    • Additional accessories available
    • Follows all NFPA-1851 guidelines
    • * Surcharges for Canadian customers will apply
  • Multiple Purpose Storage System – Hose and Clyinder Configuration

    Multiple Purpose Storage System – Hose and Clyinder Configuration

    • Hose and Cylinder Configuration includes (2) SB-1 (4) VSGS-2420
  • Multiple Purpose Storage System – Hose/SCBA/Cylinder Configuration

    Multiple Purpose Storage System – Hose/SCBA/Cylinder Configuration

    • Hose/SCBA/Cylinder Configuration includes (3) VSGS-2420, (2) SB-1, (1) SB-2, (8) LBSC
  • Multiple Purpose Storage System – Cylinder Configuration

    Multiple Purpose Storage System – Cylinder Configuration

    • Cylinder Configuration storage includes (8) VSGS-2420, (8) LBSC
  • Mobile Hose Cart – 72″ Two Tier Unit

    Mobile Hose Cart – 72″ Two Tier Unit

    • Holds up to 1300' of 2 ½" hose and has a 4,400 lb. capacity
    • MADE IN THE USA
    • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
    • Made of heavy-duty steel with a durable red powder coat finish
    • Can easily support 100' coils
    • Can be used with Hose Winder (HW-1)
    • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
    • Ships knocked down for freight savings
  • Mobile Hose Cart – 72″ Three Tier Unit

    Mobile Hose Cart – 72″ Three Tier Unit

    • Holds up to 2000' of 2 ½” hose and has a capacity of 4,400 lbs.
    • MADE IN THE USA
    • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
    • Made of heavy-duty steel with a durable red powder coat finish
    • Can easily support 100' coils
    • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
    • Can be used with Hose Winder (HW-1)
    • Ships knocked down for freight savings
  • Mobile Hose Cart – 104″ Two Tier Unit

    Mobile Hose Cart – 104″ Two Tier Unit

    • Holds up to 2000' of 2 ½" hose and has a capacity of 4,400 lbs.
    • MADE IN THE USA
    • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
    • Can easily support 100' coils
    • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
    • Can be used with Hose Winder (HW-1)
    • Ships knocked down for freight savings
  • Mobile Hose Cart – 104″ Three Tier Unit

    Mobile Hose Cart – 104″ Three Tier Unit

    • Holds up to 3000' of 2 ½" hose and has a 4,400 lb. capacity
    • MADE IN THE USA
    • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
    • Made of heavy-duty steel with a durable red powder coat finish
    • Can easily support 100' coils
    • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
    • Can be used with Hose Winder (HW-1)
    • Ships knocked down for freight savings
  • Mobile Hose Dryer

    Mobile Hose Dryer

    • Made in the USA
    • Built to dry hose, immersion suits, wet or dry dive gear and/or decontaminated hazmat suits
    • Stores and dries up to 1200’ of 1 ½” - 1 ¾” or up to 800’ of 2 ½” - 3” hose
    • Complete with 4 heavy-duty 5” casters
    • Made of heavy-duty steel with red power coated finish
    • Optional hangers hold turnouts, rope, webbing, slings and salvage covers
    • Can be used with our Hose Winder (HW-1)
  • Dry and Store Hose Rack

    Dry and Store Hose Rack

    • Dry up to 900
    • Can be used with our Hose Winder.
    • Ideal for use in smaller stations.
  • Hose Washer

    Hose Washer

    • Heavy gauge stainless steel construction
    • Power- 220V-20amp
    • 2 high pressure soap injectors and 10 high pressure rinse injector
    • (2) 10" nylon scrub brushes and (2) 12" polymer disks with nylon rollers
    • Removable rear panel for easy access to components for service or maintenance
    • Water boost pump pressurizes standard garden hose to 300 psi for powerful cleaning
    • Water drain - 6' flexible drain line from bottom of cabinet
    • Automatically feeding drive motor powers the washer brushes and exit squeegees
  • PPE and Hose Dryer

    PPE and Hose Dryer

    • MADE IN THE USA
    • Custom built for firefighter turnout gear (PPE) and hose
    • Made from heavy-duty steel construction with a white powder coat finish
    • Accessories included: (4) PPE hangers, (2) boot hangers, (1) glove rack that holds 26 gloves
    • Additional accessories available including our MHD-42 Hose Drying Rack
    • Follows all NFPA-1851 guidelines
    • Comes complete with user manual
    • * Surcharge for Canadian customers applies.
  • Hose Drying Rack

    Hose Drying Rack

    • Made in the USA
    • Can hold up to 600’ of 1 ½”-1 ¾” and up to 500’ of 2 ½”-3” hose
    • Made from heavy-duty steel with a red powder coat finish
    • Complete with (4) 5” heavy-duty swivel casters; (2) with foot operated brakes
  • Hose Winder

    Hose Winder

    • Can wind tight coils or donuts in 1” – 2.5” hose
    • Roller guide removes air and water as you roll on small diameter hoses
    • Fits mobile, stationary or fixed racks with 2½” square tubular frame
    • Optional trailer hitch mount (TM-2) allows you to attach to vehicle
    • SIZE: 35.5” (39.5 at lonest point) x 24.5” x 15.5”
  • Tilting Hose Turntable

    Tilting Hose Turntable

    • MADE IN THE USA
    • 2 Heavy-duty 5” rigid casters & 1 freestanding leg
    • Lock handle
    • Table adjusts from a flat horizontal to a complete vertical position and anywhere in between
    • Rugged steel construction with durable red powder coat finish
    • Table top: 27” Diameter
  • Air Flow Coat Hanger

    Air Flow Coat Hanger

    • 4 come standard with our PPHD
  • Air Flow Boot Hanger

    Air Flow Boot Hanger

    • Holds 3 pair of boots
    • 2 come complete with our PPEHD
  • Trailer Hitch Mount

    Trailer Hitch Mount

    • Pair with our Hose Winder (HW-1)
    • Customer to provide standard trailer hitch pin
  • Cover Plate

    Cover Plate

    • Can be used with our (DSHR) Dry and Store Hose Rack and our (HC) Mobile Hose Carts
    • Made of heavy-duty steel with red powder coated finish
    • Made in the USA
    • Hardware not provided to attach to hose racks
  • Air Pack L-Bracket

    Air Pack L-Bracket

    • Composed of a back plate & foot plate and (2) Speed Clips
    • All hardware for assembly and mounting is included
    • Powder coated which prevents the steel surfaces from rusting and prevents damage to SCBA cylinders
    • Specify bottle size (5", 6" or 7") when getting this with your product (MPSS, Red Racks, SOS Racks, Etc.)
    • Clips were engineered with unique rounded ends providing a smooth bearing surface to prevent gouging or marring of SCBA cylinders
    • Assembly should require only a few minutes' time with a Phillips head screwdriver and 7/16" wrench